LAHCINI Mohammed - Profil du chercheur

Retour à l'ouvrage

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire de Matériaux innovants, Énergie et Développement durable (IMED-Lab)

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Auteur: Manal Chaib, Said Elkhezraji, Suman Thakur, Hicham Ben Youcef, Mohammed Lahcini, Raquel Verdejo

Année: 2025

Éditeur: Rubber Materials

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (101 au total)

Efficient Synthesis of New 2H-Chromene Retinoids Hybrid Derivatives by Suzuki Cross-coupling Reactions

Auteur: Kaoukabi, A., Belachemi, L., Lahcini, M., Massuard, M.-C.V., Croix, C.

Revue: Journal of Heterocyclic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/jhet.3478

Synthesis and characterization of Ni (II), Cu (II), Fe (II) and Fe3O4 nanoparticle complexes with tetraaza macrocyclic Schiff base ligand for antimicrobial activity and cytotoxic activity against cancer and normal cells

Auteur: Laroussi Chaabane, Hassiba Chahdoura, Wassim Moslah, Mejdi Snoussi, Emmanuel Beyou, Mohammed Lahcini, Najet Srairi‐Abid, Mohamed Hassen V. Baouab

Revue: Applied Organometallic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/aoc.4860

Effect of clay on the dielectric properties of novel fluorinated methacrylate nanocomposites

Auteur: Douiri, H. Ghorbel, N., Raihane, M., Arous, M., Ilsouk, M., Lahcini, M., Yagci, Y., Tasdelen, M.A. , Kallel, A.

Revue: Polymer Composites

Année: 2019

DOI: https://doi.org/10.1002/pc.25192

Synthesis of poly(ε-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Auteur: Taha El Assimi, Roko Blažic, Abdelkrim El Kadib, Mustapha Raihane, Redouane Beniazza, Gerrit A. Luinstra, Elvira Vidović, Mohammed Lahcini

Revue: Carbohydrate Polymers

Année: 2019

DOI: https://doi.org/10.1016/j.carbpol.2019.05.049

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures, energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazole

Auteur: Marwa Chaabene, Soumaya Agren, Abdul-Rahman Allouche, Mohammed Lahcini, Rafik Ben Chaâbane, Mohamed Hassen V Baouab

Revue: Applied Organometallic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/aoc.5218

Aldehyde-functionalized chitosan-montmorillonitefilms as dynamically-assembled, switchable-chemical release bioplastics

Auteur: Jamal Chabbi, Oumayma Jennah, Nadia Katir, Mohamed Lahcini, Mosto Bousmina, Abdelkrim El Kadib

Revue: Carbohydrate Polymers

Année: 2018

DOI: https://doi.org/10.1016/j.carbpol.2017.12.036

Enhanced proton transport properties of Nafion via functionalized halloysite nanotube

Auteur: Ibtissam Ressam, Abdelkrim El Kadib, Mohammed Lahcini, Gerrit A. Luinstra, Hubert Perrot, Ozlem Sel

Revue: International Journal of Hydrogen Energy

Année: 2018

DOI: https://doi.org/10.1016/j.ijhydene.2018.05.025

Photoredox Catalysis at Copper(II) on Chitosan: Application to Photolatent CuAAC

Auteur: Oumayma Jennah , Redouane Beniazza , Cédric Lozach , Damien Jardel , Florian Molton ,Carole Duboc , Thierry Buffeteau , Abdelkrim El Kadib Dominique, Lastécouères , Mohammed Lahcini , Jean‐Marc Vincent

Revue: Advanced Synthesis and Catalysis

Année: 2018

DOI: https://doi.org/10.1002/adsc.201800964

Preparation of fluorinated methacrylate/clay nanocomposite via in-situ polymerization: characterization, structure and properties

Auteur: Mohamed Karamane, Mustapha Raihane, Mehmet Atilla Tasdelen, Tamer Uyar, Mohamed Lahcini, Mohamed Ilsouk, Yusuf Yagci

Revue: J. Polymer Science Part A Polymer Chemistry

Année: 2017

DOI: https://doi.org/10.1002/pola.28403

« Précédent 7 8 9 10 11 Suivant »

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens, France,

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens (France)

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Manifestation: Symposium Sciences and innovation for Carboneutrality 2SIC2025.

Date: 2025-07-10

Organisation: Amiens, France.

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Manifestation: XVI Congreso Nacional de Materiales Compuestos

Date: 2025-07-08

Organisation: Barcelona, España,

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de printemps de la Société Chimique de France (SCF), section Rhône-Alpes

Date: 2025-06-03

Organisation: Villeurbanne

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de l’Ecole Doctorale Chimie Lyon 2025

Date: 2025-05-20

Organisation: Villeurbanne

1 2 3 Suivant »

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Auteur: Jihad Oumerri

Directeur: Lahcini Mohammed

Soutenance: 2025

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (101 au total)

Efficient Synthesis of New 2H-Chromene Retinoids Hybrid Derivatives by Suzuki Cross-coupling Reactions

Synthesis and characterization of Ni (II), Cu (II), Fe (II) and Fe3O4 nanoparticle complexes with tetraaza macrocyclic Schiff base ligand for antimicrobial activity and cytotoxic activity against cancer and normal cells

Effect of clay on the dielectric properties of novel fluorinated methacrylate nanocomposites

Synthesis of poly(&epsilon;-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures, energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazole

Aldehyde-functionalized chitosan-montmorillonitefilms as dynamically-assembled, switchable-chemical release bioplastics

Enhanced proton transport properties of Nafion via functionalized halloysite nanotube

Photoredox Catalysis at Copper(II) on Chitosan: Application to Photolatent CuAAC

Preparation of fluorinated methacrylate/clay nanocomposite via in-situ polymerization: characterization, structure and properties

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Synthesis of poly(ε-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage