LAHCINI Mohammed - Profil du chercheur

Retour à l'ouvrage

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire de Matériaux innovants, Énergie et Développement durable (IMED-Lab)

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Auteur: Manal Chaib, Said Elkhezraji, Suman Thakur, Hicham Ben Youcef, Mohammed Lahcini, Raquel Verdejo

Année: 2025

Éditeur: Rubber Materials

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (101 au total)

Blue Highly Fluorescent Boranil Derived From Anil Ligand: Synthesis, Characterization, Experimental and Theoretical Evaluation of Solvent Effect on Structures and Photophysical Properties

Auteur: Soumaya Agren, Marwa Chaabene, Abdul-Rahman Allouche, Rafik Ben Chaâbane, Mohamed Lahcinie, Mohamed Hassen V Baouab

Revue: Applied Organometallic Chemistry

Année: 2020

Slow-release fertilizers based on starch acetate/glycerol/polyvinyl alcohol biocomposites for sustained nutrient release

Auteur: A. Sofyane , E. Ablouh, M. Lahcini, A. Elmeziane, M. Khouloud, H. Kaddami, M. Raihane

Revue: Materials Today: Proceedings

Année: 2020

DOI: https://doi.org/10.1016/j.matpr.2020.05.319

Aldehyde-conjugated chitosan-graphene oxide glucodynamers: Ternary cooperative assembly and controlled chemical release

Auteur: Jamal Chabbi , Abdelhafid Aqil , Nadia Katir , Bénédicte Vertruyen , Christine Jerôme, Mohamed Lahcini, Abdelkrim El Kadib

Revue: Carbohydrate Polymers

Année: 2020

DOI: https://doi.org/10.1016/j.carbpol.2019.115634

Properties of Coated Controlled Release Diammonium Phosphate Fertilizers Prepare with the Use of Bio-based Amino Oil

Auteur: Asma Sofyane, Mohammed Lahcini, Abdellatif El Meziane, Mehdi Khouloud, Abdelmalek Dahchour, Sylvain Caillol, Mustapha Raihane JAOCS, Journal of the American Oil Chemists' Society

Revue: Journal of the American Oil Chemists' Society

Année: 2020

DOI: https://doi.org/10.1002/aocs.12360

Poly(ε‑caprolactone)‑g‑ Guar Gum and Poly(ε‑caprolactone)‑g‑Halloysite Nanotubes as Coatings for Slow‑Release DAP Fertilizer

Auteur: Taha El Assimi, Manal Chaib, Mustapha Raihane, Abdellatif El Meziane, Mehdi Khouloud, Rachid Benhida, Redouane Beniazza,·Mohammed Lahcini

Revue: Journal of Polymers and the Environment

Année: 2020

DOI: DOI:10.1007/s10924-020-01750-7

Structure, thermal and mechanical properties of poly (ε-caprolactone) /organomodified clay bionanocomposites prepared in open air by in situ polymerization

Auteur: H. Elghaoui , S. Hrichi , M. Raihane , M. Arous , F. Z. Bouharras , R. Verdejo , R. Beniazza , M. Ilsouk , M. A. Lopez-Manchado, M. Lahcini

Revue: Journal of Macromolecular Science, Part A: Pure and Applied Chemistry

Année: 2020

DOI: https://doi.org/10.1080/10601325.2020.1800412

Organotin-bridged ionic liquid as a solvent-free, leaching-resistive catalyst for ring opening polymerization of -caprolactone

Auteur: Asmaa Bouyahya, Sebastien Balieu, Redouane Beniazza, Mustapha Raihane, Abdelkrim El Kadib, d Didier Lecerfe Pascal Thebault, Géraldine Gouhier and Mohammed Lahcini

Revue: New J. Chem.,

Année: 2019

DOI: https://doi.org/10.1039/C8NJ05985C

Tuning Charge Storage Properties of Supercapacitive Electrodes Evidenced by in Situ Gravimetric and Viscoelastic Explorations

Auteur: Gao, W., Debiemme-Chouvy, C., Lahcini, M., Perrot, H., Sel, O

Revue: Analytical Chemistry

Année: 2019

DOI: doi.org/10.1021/acs.analchem.8b04886

Phosphorylated micro-: Vs. nano-cellulose: A comparative study on their surface functionalisation, growth of titanium-oxo-phosphate clusters and removal of chemical pollutants

Auteur: Sara Blilid, Nadia Katir, Jamal El Haskouri, Mohammed Lahcini, Sébastien Royer, Abdelkrim El Kadib

Revue: New Journal of Chemistry

Année: 2019

DOI: https://doi.org/10.1039/C9NJ03187A

« Précédent 6 7 8 9 10 Suivant »

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens, France,

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens (France)

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Manifestation: Symposium Sciences and innovation for Carboneutrality 2SIC2025.

Date: 2025-07-10

Organisation: Amiens, France.

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Manifestation: XVI Congreso Nacional de Materiales Compuestos

Date: 2025-07-08

Organisation: Barcelona, España,

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de printemps de la Société Chimique de France (SCF), section Rhône-Alpes

Date: 2025-06-03

Organisation: Villeurbanne

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de l’Ecole Doctorale Chimie Lyon 2025

Date: 2025-05-20

Organisation: Villeurbanne

1 2 3 Suivant »

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Auteur: Jihad Oumerri

Directeur: Lahcini Mohammed

Soutenance: 2025

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (101 au total)

Blue Highly Fluorescent Boranil Derived From Anil Ligand: Synthesis, Characterization, Experimental and Theoretical Evaluation of Solvent Effect on Structures and Photophysical Properties

Slow-release fertilizers based on starch acetate/glycerol/polyvinyl alcohol biocomposites for sustained nutrient release

Aldehyde-conjugated chitosan-graphene oxide glucodynamers: Ternary cooperative assembly and controlled chemical release

Properties of Coated Controlled Release Diammonium Phosphate Fertilizers Prepare with the Use of Bio-based Amino Oil

Poly(&epsilon;‑caprolactone)‑g‑ Guar Gum and Poly(&epsilon;‑caprolactone)‑g‑Halloysite Nanotubes as Coatings for Slow‑Release DAP Fertilizer

Structure, thermal and mechanical properties of poly (&epsilon;-caprolactone) /organomodified clay bionanocomposites prepared in open air by in situ polymerization

Organotin-bridged ionic liquid as a solvent-free, leaching-resistive catalyst for ring opening polymerization of -caprolactone

Tuning Charge Storage Properties of Supercapacitive Electrodes Evidenced by in Situ Gravimetric and Viscoelastic Explorations

Phosphorylated micro-: Vs. nano-cellulose: A comparative study on their surface functionalisation, growth of titanium-oxo-phosphate clusters and removal of chemical pollutants

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Poly(ε‑caprolactone)‑g‑ Guar Gum and Poly(ε‑caprolactone)‑g‑Halloysite Nanotubes as Coatings for Slow‑Release DAP Fertilizer

Structure, thermal and mechanical properties of poly (ε-caprolactone) /organomodified clay bionanocomposites prepared in open air by in situ polymerization

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage