LAHCINI Mohammed - Profil du chercheur

Retour à l'ouvrage

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire de Matériaux innovants, Énergie et Développement durable (IMED-Lab)

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Auteur: Manal Chaib, Said Elkhezraji, Suman Thakur, Hicham Ben Youcef, Mohammed Lahcini, Raquel Verdejo

Année: 2025

Éditeur: Rubber Materials

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (101 au total)

Lead-free nanocomposite piezoelectric nanogenerator film for biomechanical energy harvesting

Auteur: Hanani, Z., Izanzar, I., Amjoud, M. Lahcini, M.,.Kutnjak, Z., Gouné, M.

Revue: Nano Energy,

Année: 2021

DOI: DOI: 10.1016/j.nanoen.2020.105661

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Auteur: Ghorbel, N., Raihane, M., Lahcini, M., Kallel, A.

Revue: Polymer Engineering and Science

Année: 2021

DOI: DOI: 10.1002/pen.25583

Dielectric and thermal characteristics of Beidellite nanoclay-reinforced poly(butylene succinate)

Auteur: Ezzeddine, I., Ghorbel, N., Ilsouk, M., Lahcini, M, .Raihane, M., Kallel, A.

Revue: Materials Chemistry and Physics

Année: 2021

DOI: DOI: 10.1016/j.matchemphys.2020.123855

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide–formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Auteur: Mehdaoui, R., Agren, S., Dhahri, A., Lahcini, M., Baouab, M.H.V.

Revue: Applied Organometallic Chemistry

Année: 2021

DOI: https://doi.org/10.1002/aoc.6257

Formulation and characterization of hydroxyapatite-based composite with enhanced compressive strength and controlled antibiotic release

Auteur: Ait Said, H., Noukrati, H., Oudadesse, Ben Youcef, H., Lefeuvre, Hakkou, R., Lahcini, M., Barroug, A.

Revue: Journal of Biomedical Materials Research - Part A

Année: 2021

DOI: DOI: 10.1002/jbm.a.37186

Manufacturing methods, properties, and potential applications in bone tissue regeneration of hydroxyapatite-chitosan biocomposites: A review

Auteur: H Ait Said, H Mabroum, M Lahcini, H Oudadesse, A Barroug, H Ben Youcef, H Noukrati

Revue: International Journal of Biological Macromolecules

Année: 2021

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125150

Exploiting poly (ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers

Auteur: Abdelghani El Mouat, Taha El Assimi, Mustapha Raihane, Jérémy Ternel, Hervé Bricout, Eric Monflier, Sébastien Tilloy, Mohammed Lahcini

Revue: Progress in Organic Coatings

Année: 2021

DOI: https://doi.org/10.1016/j.porgcoat.2023.107513

Structure, thermal and mechanical properties of poly (ε-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Auteur: H. Elghaoui , S. Hrichi , M. Raihane , M. Arous , F. Z. Bouharras , R. Verdejo , R. Beniazza , M. Ilsouk , M. A. Lopez-Manchado & M. Lahcini

Revue: Journal of Macromolecular Science, Part A: Pure and Applied Chemistry

Année: 2020

Functionalization of developed bacterial cellulose with magnetite nanoparticles for nanobiotechnology and nanomedicine applications

Auteur: Laroussi Chaabane, Hassiba Chahdoura, Rahma Mehdaoui, Mejdi Snoussi, Emmanuel Beyou, Mohammed Lahcini and Mohamed Hassen V Baouab

Revue: Carbohydrate Polymers

Année: 2020

« Précédent 5 6 7 8 9 Suivant »

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Manifestation: 2SIC Symposium – Sciences and Innovation for Carboneutrality

Date: 2025-07-10

Organisation: Amiens, France

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens, France,

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Manifestation: Symposium Sciences et Innovation pour la Carboneutralité (2SIC)

Date: 2025-07-10

Organisation: Amiens (France)

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Manifestation: Symposium Sciences and innovation for Carboneutrality 2SIC2025.

Date: 2025-07-10

Organisation: Amiens, France.

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Manifestation: XVI Congreso Nacional de Materiales Compuestos

Date: 2025-07-08

Organisation: Barcelona, España,

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de printemps de la Société Chimique de France (SCF), section Rhône-Alpes

Date: 2025-06-03

Organisation: Villeurbanne

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Manifestation: Journée de l’Ecole Doctorale Chimie Lyon 2025

Date: 2025-05-20

Organisation: Villeurbanne

1 2 3 Suivant »

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Auteur: Jihad Oumerri

Directeur: Lahcini Mohammed

Soutenance: 2025

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (101 au total)

Lead-free nanocomposite piezoelectric nanogenerator film for biomechanical energy harvesting

Interfacial characteristics of poly(&epsilon;-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Dielectric and thermal characteristics of Beidellite nanoclay-reinforced poly(butylene succinate)

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide&ndash;formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Formulation and characterization of hydroxyapatite-based composite with enhanced compressive strength and controlled antibiotic release

Manufacturing methods, properties, and potential applications in bone tissue regeneration of hydroxyapatite-chitosan biocomposites: A review

Exploiting poly (ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers

Structure, thermal and mechanical properties of poly (&epsilon;-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Functionalization of developed bacterial cellulose with magnetite nanoparticles for nanobiotechnology and nanomedicine applications

Communications (78 au total)

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Ionic Liquids as Innovative Supports for Tin Catalysts in the Synthesis of Biodegradable Polymers

Post-Synthesis: A New Approach to Robust, Highly Efficient, and Sustainable MOFs Catalysts for CO2 Fixation and Knoevenagel Condensation under mildConditions

Hyperbranched Poly(ε-caprolactone) Grafted from Hydrohydroxymethylated vegetable Oil: From Synthesis to Application as a Biodegradable Coating for Water-Soluble Fertilizers.

An Innovative Strategy for Designing Polycaprolactone-Based Biocomposites Using a Functionalized Cellulose Filler

Poly(Ɛ-caprolactone) grafted from Carboxy Methyl Cellulose as an amphiphilic coating material for slow release fertilizer

Development of MXene-Based Self-Blowing NIPU Foams for Lightweight and Sustainable Applications

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Scalable Synthesis and Homopolymerization of a Biobased Caprolactone

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide–formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Structure, thermal and mechanical properties of poly (ε-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage