LAHCINI Mohammed - Profil du chercheur

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire de Matériaux innovants, Énergie et Développement durable (IMED-Lab)

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (3 au total)

Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites

Auteur: Zahira Hichame, Mehdi Mennani, Imane Haydari, Asmae Laksir, Sara Nour Eddine, Mohammed Lahcini, Zineb Kassab

Année: 2026

Éditeur: Woodhead Publishing

Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites

Auteur: Zahira Hichame, Asmae Laksir, Mehdi Mennani, Chirâa El Idrissi El Hassani, Youssef Ait Naceur, Mohammed Lahcini, Zineb Kassab

Année: 2026

Éditeur: Woodhead Publishing

Rubber Materials Fundamentals, Sustainability, and Applications

Auteur: Manal Chaib, Said Elkhezraji, Suman Thakur, Hicham Ben Youcef, Mohammed Lahcini, Raquel Verdejo

Année: 2025

Éditeur: Rubber Materials

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (106 au total)

Chitosan–graphene oxide films and CO2-dried porous aerogel microspheres: Interfacial interplay and stability

Auteur: Sana Frindy, Ana Primo, Hamid Ennajih, Qaiss Abou El Kacem, Rachid Bouhfid, Mohamed lahcini, El Moukhtar Essassi, Hermenegildo Garcia , Abdelkrim El Kadib

Revue: Carbohydrate Polymers

Année: 2017

DOI: https://doi.org/10.1016/j.carbpol.2017.03.034

Correlation between the Proton Conductivity and Diffusion Coefficient of Sulfonic Acid Functionalized Chitosan and Nafion Composites via Impedance Spectroscopy Measurements

Auteur: I. Ressam, M. Lahcini, H. Perrot, O. Sel

Revue: Ionics

Année: 2017

DOI: DOI: 10.1007/s11581-0172151-5

Unsaturated copolyesters of lactide

Auteur: M. Lahcini, S. M. Weidner, J. Oumayama, F. Scheliga, H. R. Kricheldorf

Revue: RSC Advances

Année: 2016

DOI: https://doi.org/10.1039/C6RA16008E

Copper nanoparticles supported on graphene as an efficient catalyst for A3 coupling of benzaldehydes

Auteur: Sana Frindy, Abdelkrim El Kadib, Mohamed Lahcini, Ana Primo, Hermenegildo García

Revue: Catalysis Science & Technology

Année: 2016

DOI: DOI: 10.1039/c5cy01414j

Nanosized Copper Supported on Graphene as Catalyst for the Oxidative C-O Cross-Coupling of Phenols

Auteur: Sana Frindy, Abdelkrim El Kadib, Mohamed Lahcini, Ana Primo, Hermenegildo Garcia

Revue: Chemistry Select

Année: 2016

DOI: https://doi.org/10.1002/slct.201600011

Isotropic and Oriented Copper Nanoparticles Supported on Graphene as Aniline Guanylation Catalysts

Auteur: Sana Frindy, Abdelkrim El Kadib, Mohamed Lahcini, Ana Primo, Hermenegildo García

Revue: ACS Catalysis

Année: 2016

DOI: https://doi.org/10.1021/acscatal.6b00995

Harnessing synergies in Tin-clay catalyst for the preparation of poly(ε caprolactone)/halloysite nanocomposites

Auteur: Lahcini Mohammed; Elhakioui Somayya; Szopinsk Daniel i; Neuer Björn; El Kadib Abdelkrim; Scheliga Felix; Raihane Mustapha; Baltá Calleja Francisco José; Luinstra Gerrit A

Revue: European Polymer Journal

Année: 2016

DOI: https://doi.org/10.1016/j.eurpolymj.2016.05.014

Insightful understanding of the role of clay topology on the stability of biomimetic hybrid chitosan-clay thin films and CO2-dried porous aerogel microspheres

Auteur: Sana Frindy, Ana Primo, Abou el kacem Qaiss, Rachid Bouhfid, Mohamed Lahcini, Hermenegildo Garcia, Mosto Bousmina, Abdelkrim El Kadib

Revue: Carbohydrate Polymers

Année: 2016

DOI: DOI: 10.1016/j.carbpol.216.03.077

Pd embedded in chitosan microspheres as tunable soft-materials for Sonogashira cross-coupling in water-ethanol mixture

Auteur: Sana Frindy, Ana Primo, Mohamed Lahcini, Mosto Bousmina, Hermenegildo Garcia, Abdelkrim El Kadib

Revue: Green Chemistry

Année: 2015

DOI: DOI:10.1039/c4gc02175d

« Précédent 9 10 11 12 Suivant »

Communications (77 au total)

Fluorinated hydrophobic polymers as novel coating materials for slow controlled release fertilizer

Manifestation: Fluoropolymer meeting 2018

Date: 2018

Organisation: Denver (Collorado) USA

Tailoring hydrophobicity of poly(2,2,2-trifluoroethyl methacrylate) by preparing copolymers based on N-vinylpyrrolidone

Manifestation: Fluoropolymer meeting 2018

Date: 2018

Organisation: Denver (Collorado) USA

BT/BP: an Eco-friendly Nanocomposite for Electrical Energy Storage and Biomedical Applications"

Manifestation: Beacons of Hope in the Quest For the Next Einstein in Africa/MENA region, Humboldt Kolleg

Date: 2018

Organisation: Marrakech- Morocco

Self-Assembly and Controlled-Release with Sustainable, Nacre-like Functionalized Chitosan Thin Films

Manifestation: 2nd International Conference on Materials and Environmental Science (ICMES 2018)

Date: 2018

Organisation: Saidia Morocco

In-Situ Open Preparation of High Molecular Weight poly(ε-Caprolactone)/ Halloysite Nanotubes bionanocomposites

Manifestation: MALTA VIII Frontiers of Sciences: Research and Education in the Middle East

Date: 2017

Organisation: Malta

Themo-sensitive and environmental friendly diblock copolymers obtained via ATRP/ROP combination

Manifestation: MALTA VIII Frontiers of Sciences: Research and Education in the Middle East

Date: 2017

Organisation: Malta

Copper nanoparticles stabilized in porous chitosan aerogel as a heterogeneous catalyst for C-S cross coupling

Manifestation: 4th International Conference on Biobased Materials and Composites

Date: 2017

Organisation: Nantes - France

Pd Embedded in chitosan microspheres as tunable soft-materials for Sonogashira cross-coupling in water-ethanol mixture

Manifestation: 4th International Conference on Biobased Materials and Composites

Date: 2017

Organisation: Nantes - France

Bionanocomposites poly(-caprolactone)/organ omodified Moroccan beidellite clay prepared by in situ ring opening polymerization ;: characterizations and properties

Manifestation: 4th International Conference on Biobased Materials and Composites

Date: 2017

Organisation: Nantes - France

« Précédent 5 6 7 8 9 Suivant »

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Auteur: Jihad Oumerri

Directeur: Lahcini Mohammed

Soutenance: 2025

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (3 au total)

Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites

Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites

Rubber Materials Fundamentals, Sustainability, and Applications

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (106 au total)

Chitosan&ndash;graphene oxide films and CO2-dried porous aerogel microspheres: Interfacial interplay and stability

Correlation between the Proton Conductivity and Diffusion Coefficient of Sulfonic Acid Functionalized Chitosan and Nafion Composites via Impedance Spectroscopy Measurements

Unsaturated copolyesters of lactide

Copper nanoparticles supported on graphene as an efficient catalyst for A3 coupling of benzaldehydes

Nanosized Copper Supported on Graphene as Catalyst for the Oxidative C-O Cross-Coupling of Phenols

Isotropic and Oriented Copper Nanoparticles Supported on Graphene as Aniline Guanylation Catalysts

Harnessing synergies in Tin-clay catalyst for the preparation of poly(&epsilon; caprolactone)/halloysite nanocomposites

Insightful understanding of the role of clay topology on the stability of biomimetic hybrid chitosan-clay thin films and CO2-dried porous aerogel microspheres

Pd embedded in chitosan microspheres as tunable soft-materials for Sonogashira cross-coupling in water-ethanol mixture

Communications (77 au total)

Fluorinated hydrophobic polymers as novel coating materials for slow controlled release fertilizer

Tailoring hydrophobicity of poly(2,2,2-trifluoroethyl methacrylate) by preparing copolymers based on N-vinylpyrrolidone

BT/BP: an Eco-friendly Nanocomposite for Electrical Energy Storage and Biomedical Applications&quot;

Self-Assembly and Controlled-Release with Sustainable, Nacre-like Functionalized Chitosan Thin Films

In-Situ Open Preparation of High Molecular Weight poly(&epsilon;-Caprolactone)/ Halloysite Nanotubes bionanocomposites

Themo-sensitive and environmental friendly diblock copolymers obtained via ATRP/ROP combination

Copper nanoparticles stabilized in porous chitosan aerogel as a heterogeneous catalyst for C-S cross coupling

Pd Embedded in chitosan microspheres as tunable soft-materials for Sonogashira cross-coupling in water-ethanol mixture

Bionanocomposites poly(-caprolactone)/organ omodified Moroccan beidellite clay prepared by in situ ring opening polymerization ;: characterizations and properties

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Chitosan–graphene oxide films and CO2-dried porous aerogel microspheres: Interfacial interplay and stability

Harnessing synergies in Tin-clay catalyst for the preparation of poly(ε caprolactone)/halloysite nanocomposites

BT/BP: an Eco-friendly Nanocomposite for Electrical Energy Storage and Biomedical Applications"

In-Situ Open Preparation of High Molecular Weight poly(ε-Caprolactone)/ Halloysite Nanotubes bionanocomposites

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage