LAHCINI Mohammed - Profil du chercheur

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire de Matériaux innovants, Énergie et Développement durable (IMED-Lab)

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Auteur: Manal Chaib, Said Elkhezraji, Suman Thakur, Hicham Ben Youcef, Mohammed Lahcini, Raquel Verdejo

Année: 2025

Éditeur: Rubber Materials

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (101 au total)

Efficient Synthesis of New 2H-Chromene Retinoids Hybrid Derivatives by Suzuki Cross-coupling Reactions

Auteur: Kaoukabi, A., Belachemi, L., Lahcini, M., Massuard, M.-C.V., Croix, C.

Revue: Journal of Heterocyclic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/jhet.3478

Synthesis and characterization of Ni (II), Cu (II), Fe (II) and Fe3O4 nanoparticle complexes with tetraaza macrocyclic Schiff base ligand for antimicrobial activity and cytotoxic activity against cancer and normal cells

Auteur: Laroussi Chaabane, Hassiba Chahdoura, Wassim Moslah, Mejdi Snoussi, Emmanuel Beyou, Mohammed Lahcini, Najet Srairi‐Abid, Mohamed Hassen V. Baouab

Revue: Applied Organometallic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/aoc.4860

Effect of clay on the dielectric properties of novel fluorinated methacrylate nanocomposites

Auteur: Douiri, H. Ghorbel, N., Raihane, M., Arous, M., Ilsouk, M., Lahcini, M., Yagci, Y., Tasdelen, M.A. , Kallel, A.

Revue: Polymer Composites

Année: 2019

DOI: https://doi.org/10.1002/pc.25192

Synthesis of poly(ε-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Auteur: Taha El Assimi, Roko Blažic, Abdelkrim El Kadib, Mustapha Raihane, Redouane Beniazza, Gerrit A. Luinstra, Elvira Vidović, Mohammed Lahcini

Revue: Carbohydrate Polymers

Année: 2019

DOI: https://doi.org/10.1016/j.carbpol.2019.05.049

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures, energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazole

Auteur: Marwa Chaabene, Soumaya Agren, Abdul-Rahman Allouche, Mohammed Lahcini, Rafik Ben Chaâbane, Mohamed Hassen V Baouab

Revue: Applied Organometallic Chemistry

Année: 2019

DOI: https://doi.org/10.1002/aoc.5218

Aldehyde-functionalized chitosan-montmorillonitefilms as dynamically-assembled, switchable-chemical release bioplastics

Auteur: Jamal Chabbi, Oumayma Jennah, Nadia Katir, Mohamed Lahcini, Mosto Bousmina, Abdelkrim El Kadib

Revue: Carbohydrate Polymers

Année: 2018

DOI: https://doi.org/10.1016/j.carbpol.2017.12.036

Enhanced proton transport properties of Nafion via functionalized halloysite nanotube

Auteur: Ibtissam Ressam, Abdelkrim El Kadib, Mohammed Lahcini, Gerrit A. Luinstra, Hubert Perrot, Ozlem Sel

Revue: International Journal of Hydrogen Energy

Année: 2018

DOI: https://doi.org/10.1016/j.ijhydene.2018.05.025

Photoredox Catalysis at Copper(II) on Chitosan: Application to Photolatent CuAAC

Auteur: Oumayma Jennah , Redouane Beniazza , Cédric Lozach , Damien Jardel , Florian Molton ,Carole Duboc , Thierry Buffeteau , Abdelkrim El Kadib Dominique, Lastécouères , Mohammed Lahcini , Jean‐Marc Vincent

Revue: Advanced Synthesis and Catalysis

Année: 2018

DOI: https://doi.org/10.1002/adsc.201800964

Preparation of fluorinated methacrylate/clay nanocomposite via in-situ polymerization: characterization, structure and properties

Auteur: Mohamed Karamane, Mustapha Raihane, Mehmet Atilla Tasdelen, Tamer Uyar, Mohamed Lahcini, Mohamed Ilsouk, Yusuf Yagci

Revue: J. Polymer Science Part A Polymer Chemistry

Année: 2017

DOI: https://doi.org/10.1002/pola.28403

« Précédent 7 8 9 10 11 Suivant »

Communications (78 au total)

Modified Chitosan as Efficient Heterogeneous Catalyst for One-pot Biginelli Condensation

Manifestation: the 4th EuroMagh Biocomposites International Conference

Date: 2023-11-10

Organisation: Marrakech Morocco

Biomass-derived polymer supported bismuth oxyiodide as a heterogeneous, reusable and highly efficient photocatalyst for water treatment.

Manifestation: UNESCO GSC Chair: 1 st International Conference on Biomass Valorization for Sustainable Applications BIOVASA2023

Date: 2023-11-03

Organisation: Faculté des Sciences Semlalia, Université Cadi Ayyad, Marrakech, Morocco

BIODEGRADABLE MATERIALS: FROM SYNTHESIS TO SLOW-RELEASE FERTILIZER COATING - ADVANCING SUSTAINABLE AGRICULTURE

Manifestation: EMERGING CONCEPTS & DESIGN FOR SUSTAINABILITY SYMPOSIUM

Date: 2023-10-09

Organisation: Villers-sur-Mer -France

Polymethyl methacrylate-g-carboxy-methylcellulose material: from synthesis to slow release fertilizer application.

Manifestation: The Sixth international conference on Materials & Environmental Science ICMES 2023. “Health, Sustainability & Resiliency Through Research & Innovation”

Date: 2023-06-07

Organisation: Université Mohammed Premier- Saidia-Maroc

Bismuth Supported on Phosphonium Functionalized Chitosan as Sustainable Heterogeneous Catalysts for One-pot Biginelli Condensation

Manifestation: Beacons of Hope in the Quest for the Next Einstein

Date: 2023-06-01

Organisation: Université Chouaib Doukkali- El Jadida-Maroc

Synthesis of biodegradable poly(epsilon-caprolactone) through ring-opening polymerization of epsilon-caprolactone using phosphorus pentoxide as metal-free catalyst.

Manifestation: “Beacons of Hope in the Quest for the Next Einstein In the MENA region”

Date: 2023-06-01

Organisation: Université Chouaib Doukkali- El Jadida-Maroc

Reductive hydroformylation of methyl undecenoate in a biphasic medium [ionic liquid/Heptane].

Manifestation: PhD Day :

Date: 2023-05-30

Organisation: Lille, France,

Bismuth NPs Supported on Chitosan as Sustainable Catalysts for the Hydrogenation of Nitroarenes

Manifestation: ASES IV. INTERNATIONAL SCIENTIFIC RESEARCH CONFERENCE

Date: 2023-05-13

Organisation: Istanbul, Türkiye

Titre complet: Formulation of glyco-nanostructures based on chitosan via polymerization-induced self-assembly in aqueous dispersion

Manifestation: Euromagh marrakech

Date: 2023-03-26

Organisation: CENTRE DE CONFÉRENCE DE L'UNIVERSITÉ CADI AYYAD MARRAKECH MAROC

« Précédent 1 2 3 4 5 Suivant »

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Auteur: Jihad Oumerri

Directeur: Lahcini Mohammed

Soutenance: 2025

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (1 au total)

Rubber Materials Fundamentals, Sustainability, and Applications

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (101 au total)

Efficient Synthesis of New 2H-Chromene Retinoids Hybrid Derivatives by Suzuki Cross-coupling Reactions

Synthesis and characterization of Ni (II), Cu (II), Fe (II) and Fe3O4 nanoparticle complexes with tetraaza macrocyclic Schiff base ligand for antimicrobial activity and cytotoxic activity against cancer and normal cells

Effect of clay on the dielectric properties of novel fluorinated methacrylate nanocomposites

Synthesis of poly(&epsilon;-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures, energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazole

Aldehyde-functionalized chitosan-montmorillonitefilms as dynamically-assembled, switchable-chemical release bioplastics

Enhanced proton transport properties of Nafion via functionalized halloysite nanotube

Photoredox Catalysis at Copper(II) on Chitosan: Application to Photolatent CuAAC

Preparation of fluorinated methacrylate/clay nanocomposite via in-situ polymerization: characterization, structure and properties

Communications (78 au total)

Modified Chitosan as Efficient Heterogeneous Catalyst for One-pot Biginelli Condensation

Biomass-derived polymer supported bismuth oxyiodide as a heterogeneous, reusable and highly efficient photocatalyst for water treatment.

BIODEGRADABLE MATERIALS: FROM SYNTHESIS TO SLOW-RELEASE FERTILIZER COATING - ADVANCING SUSTAINABLE AGRICULTURE

Polymethyl methacrylate-g-carboxy-methylcellulose material: from synthesis to slow release fertilizer application.

Bismuth Supported on Phosphonium Functionalized Chitosan as Sustainable Heterogeneous Catalysts for One-pot Biginelli Condensation

Synthesis of biodegradable poly(epsilon-caprolactone) through ring-opening polymerization of epsilon-caprolactone using phosphorus pentoxide as metal-free catalyst.

Reductive hydroformylation of methyl undecenoate in a biphasic medium [ionic liquid/Heptane].

Bismuth NPs Supported on Chitosan as Sustainable Catalysts for the Hydrogenation of Nitroarenes

Titre complet: Formulation of glyco-nanostructures based on chitosan via polymerization-induced self-assembly in aqueous dispersion

Thèses (13 au total)

Thèse soutenue Préparation in situ de nanovecteurs dérivés de polysaccharides naturels pour la nano-médecine

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Synthesis of poly(ε-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage