LAHCINI Mohammed - Profil du chercheur

Informations du chercheur

Nom complet

LAHCINI Mohammed

Grade

PES

Spécialité

Chimie Organométallique, Catalyse, biopolymères et matériaux hybrides

Thématique de recherche

Green Chemistry et développement durable

Laboratoire

Laboratoire Matériaux innovants, Énergie et développement durable

Établissement

Faculte des Sciences et Techniques Gueliz

Ouvrages (0 au total)

Aucun ouvrage disponible.

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Type: Non spécifié

Début: 01/05/2021

Fin: 01/05/2024

Organisme financeur:

Projet NATO Emerging Security Challenges Division, Science for Peace and Security Programme

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Type: Non spécifié

Début: 01/09/2019

Fin: 30/12/2019

Organisme financeur:

Appel à projet universitaire et recherche (APUR)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Type: Non spécifié

Début: 01/06/2013

Fin: 01/06/2015

Organisme financeur:

Grunt of Georg Forster Research Fellowship of the Alexander von Humboldt Foundation for experience researcher

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Type: Non spécifié

Début: 01/01/2013

Fin: 01/01/2015

Organisme financeur:

PHC Toubkal

Publications (91 au total)

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Auteur: Ghorbel, N., Raihane, M., Lahcini, M., Kallel, A.

Revue: Polymer Engineering and Science

Année: 2021

DOI: DOI: 10.1002/pen.25583

Dielectric and thermal characteristics of Beidellite nanoclay-reinforced poly(butylene succinate)

Auteur: Ezzeddine, I., Ghorbel, N., Ilsouk, M., Lahcini, M, .Raihane, M., Kallel, A.

Revue: Materials Chemistry and Physics

Année: 2021

DOI: DOI: 10.1016/j.matchemphys.2020.123855

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide–formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Auteur: Mehdaoui, R., Agren, S., Dhahri, A., Lahcini, M., Baouab, M.H.V.

Revue: Applied Organometallic Chemistry

Année: 2021

DOI: https://doi.org/10.1002/aoc.6257

Formulation and characterization of hydroxyapatite-based composite with enhanced compressive strength and controlled antibiotic release

Auteur: Ait Said, H., Noukrati, H., Oudadesse, Ben Youcef, H., Lefeuvre, Hakkou, R., Lahcini, M., Barroug, A.

Revue: Journal of Biomedical Materials Research - Part A

Année: 2021

DOI: DOI: 10.1002/jbm.a.37186

Manufacturing methods, properties, and potential applications in bone tissue regeneration of hydroxyapatite-chitosan biocomposites: A review

Auteur: H Ait Said, H Mabroum, M Lahcini, H Oudadesse, A Barroug, H Ben Youcef, H Noukrati

Revue: International Journal of Biological Macromolecules

Année: 2021

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125150

Exploiting poly (ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers

Auteur: Abdelghani El Mouat, Taha El Assimi, Mustapha Raihane, Jérémy Ternel, Hervé Bricout, Eric Monflier, Sébastien Tilloy, Mohammed Lahcini

Revue: Progress in Organic Coatings

Année: 2021

DOI: https://doi.org/10.1016/j.porgcoat.2023.107513

Structure, thermal and mechanical properties of poly (ε-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Auteur: H. Elghaoui , S. Hrichi , M. Raihane , M. Arous , F. Z. Bouharras , R. Verdejo , R. Beniazza , M. Ilsouk , M. A. Lopez-Manchado & M. Lahcini

Revue: Journal of Macromolecular Science, Part A: Pure and Applied Chemistry

Année: 2020

Functionalization of developed bacterial cellulose with magnetite nanoparticles for nanobiotechnology and nanomedicine applications

Auteur: Laroussi Chaabane, Hassiba Chahdoura, Rahma Mehdaoui, Mejdi Snoussi, Emmanuel Beyou, Mohammed Lahcini and Mohamed Hassen V Baouab

Revue: Carbohydrate Polymers

Année: 2020

Blue Highly Fluorescent Boranil Derived From Anil Ligand: Synthesis, Characterization, Experimental and Theoretical Evaluation of Solvent Effect on Structures and Photophysical Properties

Auteur: Soumaya Agren, Marwa Chaabene, Abdul-Rahman Allouche, Rafik Ben Chaâbane, Mohamed Lahcinie, Mohamed Hassen V Baouab

Revue: Applied Organometallic Chemistry

Année: 2020

« Précédent 4 5 6 7 8 Suivant »

Communications (65 au total)

Bismuth Supported on Phosphonium Functionalized Chitosan as Sustainable Heterogeneous Catalysts for One-pot Biginelli Condensation

Manifestation: Beacons of Hope in the Quest for the Next Einstein

Date: 2023-06-01

Organisation: Université Chouaib Doukkali- El Jadida-Maroc

Synthesis of biodegradable poly(epsilon-caprolactone) through ring-opening polymerization of epsilon-caprolactone using phosphorus pentoxide as metal-free catalyst.

Manifestation: “Beacons of Hope in the Quest for the Next Einstein In the MENA region”

Date: 2023-06-01

Organisation: Université Chouaib Doukkali- El Jadida-Maroc

Reductive hydroformylation of methyl undecenoate in a biphasic medium [ionic liquid/Heptane].

Manifestation: PhD Day :

Date: 2023-05-30

Organisation: Lille, France,

Bismuth NPs Supported on Chitosan as Sustainable Catalysts for the Hydrogenation of Nitroarenes

Manifestation: ASES IV. INTERNATIONAL SCIENTIFIC RESEARCH CONFERENCE

Date: 2023-05-13

Organisation: Istanbul, Türkiye

Titre complet: Formulation of glyco-nanostructures based on chitosan via polymerization-induced self-assembly in aqueous dispersion

Manifestation: Euromagh marrakech

Date: 2023-03-26

Organisation: CENTRE DE CONFÉRENCE DE L'UNIVERSITÉ CADI AYYAD MARRAKECH MAROC

Poly(ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers.

Manifestation: The 5th International Congress on Water and Environmental Studies :

Date: 2023-03-09

Organisation: Al-Hoceima, Morocco,

Poly(ε- caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers.

Manifestation: The 4 rd International Congress on Materials & Structural Stability:

Date: 2023-03-08

Organisation: Rabat, Morocco,

Synthesis of poly(ε-caprolactone)-grafted guar gum and halloysite nanotubes by surface-initiated ring-opening polymerization

Manifestation: EUROMAGH 2020

Date: 2020

Organisation: Rouen, France

Polylactide / Cellulose Acetate Blends as Potential Coatings Membrane to Control the Nutrients Release from Water-soluble Fertilizers

Manifestation: EUROMAGH 2020

Date: 2020

Organisation: Rouen, France

« Précédent 1 2 3 4 Suivant »

Thèses (12 au total)

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Auteur: El Hassan Boutriouia

Directeur: LAHCINI Mohammed

Soutenance: 2024

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Auteur: Abdelghni EL MOUAT

Directeur: LAHCINI Mohammed

Soutenance: 2024

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Auteur: Said EL KHAZRAJI

Directeur: Mohammed LAHCINI

Soutenance: 2023

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Auteur: Abderrahmane Nabgui

Directeur: Mohammed LAHCINI (Co-directeur)

Soutenance: 2022

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Auteur: Oumayma JENAH

Directeur: Mohammed LAHCINI

Soutenance: 2022

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Auteur: Sara Blilid

Directeur: Mohammed LAHCINI

Soutenance: 2022

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Auteur: Jamal CHABBI

Directeur: Lahcini Mohammed

Soutenance: 2021

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Auteur: Taha El Assimi

Directeur: Lahcini Mohammed

Soutenance: 2021

Valorisation de bioressources pour l'élaboration de films polymères à partir de latex aqueux ou de copolymères à blocs nanostructurants

Auteur: Ismail ADOUMAZ

Directeur: Lahcini Mohammed

Soutenance: 2020

1 2 Suivant »

Informations du chercheur

Nom complet

Grade

Spécialité

Thématique de recherche

Laboratoire

Établissement

Ouvrages (0 au total)

Projets (4 au total)

Technology against climate change to mitigate CO2 environmental security threats Acronym: TANGO

Nouvelle g&eacute;n&eacute;ration de membranes &eacute;changeuses d&rsquo;anions pour piles &agrave; combustible (NOVAMEM)

Nontoxic Catalyst for the Preparation of Biodegradables Polymers

Catalyseurs organostanniques support&eacute;s sur liquides ioniques pour la pr&eacute;paration de polym&egrave;res biod&eacute;gradables

Publications (91 au total)

Interfacial characteristics of poly(&epsilon;-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Dielectric and thermal characteristics of Beidellite nanoclay-reinforced poly(butylene succinate)

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide&ndash;formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Formulation and characterization of hydroxyapatite-based composite with enhanced compressive strength and controlled antibiotic release

Manufacturing methods, properties, and potential applications in bone tissue regeneration of hydroxyapatite-chitosan biocomposites: A review

Exploiting poly (ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers

Structure, thermal and mechanical properties of poly (&epsilon;-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Functionalization of developed bacterial cellulose with magnetite nanoparticles for nanobiotechnology and nanomedicine applications

Blue Highly Fluorescent Boranil Derived From Anil Ligand: Synthesis, Characterization, Experimental and Theoretical Evaluation of Solvent Effect on Structures and Photophysical Properties

Communications (65 au total)

Bismuth Supported on Phosphonium Functionalized Chitosan as Sustainable Heterogeneous Catalysts for One-pot Biginelli Condensation

Synthesis of biodegradable poly(epsilon-caprolactone) through ring-opening polymerization of epsilon-caprolactone using phosphorus pentoxide as metal-free catalyst.

Reductive hydroformylation of methyl undecenoate in a biphasic medium [ionic liquid/Heptane].

Bismuth NPs Supported on Chitosan as Sustainable Catalysts for the Hydrogenation of Nitroarenes

Titre complet: Formulation of glyco-nanostructures based on chitosan via polymerization-induced self-assembly in aqueous dispersion

Poly(ε-caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers.

Poly(ε- caprolactone) grafted from hydrohydroxymethylated sunflower oil as biodegradable coating material of water-soluble fertilizers.

Synthesis of poly(&epsilon;-caprolactone)-grafted guar gum and halloysite nanotubes by surface-initiated ring-opening polymerization

Polylactide / Cellulose Acetate Blends as Potential Coatings Membrane to Control the Nutrients Release from Water-soluble Fertilizers

Thèses (12 au total)

Biodegradable Materials from Synthesis to Granular Coatings for Slow-Release Fertilizer Application

Rhodium-Catalyzed Reductive Hydroformylation of Biosourced Substances in Biphasic Systemes and Application to the Encapsulation of Active ingredients for Agriculture

Synthesis of Enovironmentally Friendly and non-toxic Polyureuthane Foams and Composites

Development of biodegradable polymers and natural fillers-based nanocomposites for potential applications in active food

Synthesis and photoreduction studies of copper(II) catalysts supported on chitosan : Application to CuAAC

Des déchets aux matériaux nanostructurés : polysaccharides biosourcés et ions métalliques

Mat&eacute;riaux Nanostructures de Chitosane modifi&eacute; pour la Catalyse et le Relargage

Biodegradable Polymers Capsules for Controlled and slow Release of Granular Fertilizers

Valorisation de bioressources pour l'&eacute;laboration de films polym&egrave;res &agrave; partir de latex aqueux ou de copolym&egrave;res &agrave; blocs nanostructurants

Nouvelle génération de membranes échangeuses d’anions pour piles à combustible (NOVAMEM)

Catalyseurs organostanniques supportés sur liquides ioniques pour la préparation de polymères biodégradables

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

New sonochemical magnetite nanoparticles functionalization approach of dithiooxamide–formaldehyde developed cellulose: From easy synthesis to recyclable 4-nitrophenol reduction

Structure, thermal and mechanical properties of poly (ε-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

Synthesis of poly(ε-caprolactone)-grafted guar gum and halloysite nanotubes by surface-initiated ring-opening polymerization

Matériaux Nanostructures de Chitosane modifié pour la Catalyse et le Relargage

Valorisation de bioressources pour l'élaboration de films polymères à partir de latex aqueux ou de copolymères à blocs nanostructurants